prikaz prve stranice dokumenta Effect of sintering time and temperature on the microhardness of titanium-zirconium alloy
  Preuzmi
PDF 154.99 MB
Znanstveni rad - Izvorni znanstveni rad
Effect of sintering time and temperature on the microhardness of titanium-zirconium alloy
U: Proceedings 31st International Conference on Metallurgy and Materials, METAL 2022. Ostrava: TANGER Ltd., 2022. str. 779-784. https://doi.org/10.37904/metal.2022.4498
Slokar Benić, Ljerka; Komljenović, Luka; Erman, Žiga; Jajčinović, Magdalena

Institucijski repozitorij: Repozitorij Metalurškog fakulteta Sveučilišta u Zagrebu

Citirajte ovaj rad

Slokar Benić, Lj., Komljenović, L., Erman, Ž. i Jajčinović, M. (2022). Effect of sintering time and temperature on the microhardness of titanium-zirconium alloy. Proceedings 31st International Conference on Metallurgy and Materials, METAL 2022 (str. 779-784). Ostrava: TANGER Ltd.. doi: 10.37904/metal.2022.4498

Slokar Benić, Ljerka, et al. "Effect of sintering time and temperature on the microhardness of titanium-zirconium alloy." Proceedings 31st International Conference on Metallurgy and Materials, METAL 2022, TANGER Ltd., 2022, str. 779-784. https://urn.nsk.hr/urn:nbn:hr:115:445234

Slokar Benić, Ljerka, Luka Komljenović, Žiga Erman i Magdalena Jajčinović. "Effect of sintering time and temperature on the microhardness of titanium-zirconium alloy." U Proceedings 31st International Conference on Metallurgy and Materials, METAL 2022, 779-784. Ostrava: TANGER Ltd., 2022. Citirano 30.11.2024.. https://urn.nsk.hr/urn:nbn:hr:115:445234

Slokar Benić, Lj., et al. (2022) 'Effect of sintering time and temperature on the microhardness of titanium-zirconium alloy', Proceedings 31st International Conference on Metallurgy and Materials, METAL 2022, TANGER Ltd., Ostrava, str. 779-784. Preuzeto s: https://urn.nsk.hr/urn:nbn:hr:115:445234 (Datum pristupa: 30.11.2024.)

Slokar Benić Lj, Komljenović L, Erman Ž, Jajčinović M. Effect of sintering time and temperature on the microhardness of titanium-zirconium alloy. Proceedings 31st International Conference on Metallurgy and Materials, METAL 2022. Ostrava: TANGER Ltd.; 2022. Str. 779-784. [pristupljeno 30.11.2024.] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:445234

Lj. Slokar Benić, L. Komljenović, Ž. Erman i M. Jajčinović, "Effect of sintering time and temperature on the microhardness of titanium-zirconium alloy", Proceedings 31st International Conference on Metallurgy and Materials, METAL 2022 Ostrava: TANGER Ltd., 2022. [Online] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:445234 [Citirano: 30.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:445234
Podaci o radu
Naslov (engleski)Effect of sintering time and temperature on the microhardness of titanium-zirconium alloy
Naslov (engleski)Effect of sintering time and temperature on the microhardness of titanium-zirconium alloy
AutorLjerka Slokar Benić
AutorLuka Komljenović
AutorŽiga Erman
AutorMagdalena Jajčinović
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Sažetak (engleski)
Titanium and titanium alloys have been widely used in medicine as implant materials for the last 50 years. The reason for this could be found in a unique combination of biocompatibility and strength of these alloys. The main advantage of titanium is the ability to bind to bone and grow into the implant. Due to the high cost of production, titanium is not used in large quantities, and therefore research are focused on finding new, more economical alloys. For these reasons, the aim of this paper is to analyze the effect of powder metallurgy process parameters in the production of titanium alloy containing 20% zirconium. Starting elemental powders were a ball milled and then compacted using the hydraulic press. Sintering process was performed under the different values of time and temperature. Starting powders were characterized using the scanning electron microscope. Porosity was analyzed using the light microscope. It was found that it could be decreased by increase in sintering temperature. Microhardness of polished sintered samples was determined by Vickers method. Results showed that higher microhardness values were obtained in samples sintered at higher temperature. Finally, results show that titanium-zirconium alloy produced by this route of powder metallurgy could be potentially used in a biomedicine.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov zbornikaProceedings 31st International Conference on Metallurgy and Materials, METAL 2022
Brojčani podacistr. 779-784
ISBN978-80-88365-06-8
p-ISSN2694-9296
DOIhttps://doi.org/10.37904/metal.2022.4498
URN:NBNurn:nbn:hr:115:445234
Datum objave publikacije2022
SkupNaziv: 31st International Conference on Metallurgy and Materials METAL 2022
Lokacija: Brno, Češka
Datum početka: 2022-05-18
Datum završetka: 2022-05-19
Vrsta izlaganja: Predavanje
URL dokumentahttp://bib.irb.hr/1231473
Vrsta resursaTekst
IzdavačTANGER Ltd.
Mjesto izdavanjaOstrava
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2023-07-06 07:09:33