prikaz prve stranice dokumenta Microscopic analysis of the Cu-Al-Mn-Ni shape memory alloy after heat treatment
  Preuzmi
PDF 1.83 MB
Stručni rad - Stručni rad
Microscopic analysis of the Cu-Al-Mn-Ni shape memory alloy after heat treatment
U: Proceedings of International scientific conference ETIKUM 2018. / Agarski, Boris; Ilić Mičunović, Milana; Santoši, Željko (ur.). Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 2018. str. 21-24. urn:nbn:hr:115:669952
Kožuh, Stjepan; Ivanić, Ivana; Krtić, Ivana; Kosec, Borut; Gojić, Mirko

Institucijski repozitorij: Repozitorij Metalurškog fakulteta Sveučilišta u Zagrebu

Citirajte ovaj rad

Kožuh, S., Ivanić, I., Krtić, I., Kosec, B. i Gojić, M. (2018). Microscopic analysis of the Cu-Al-Mn-Ni shape memory alloy after heat treatment. U B. Agarski, (Ur.), M. Ilić Mičunović, (Ur.), Ž. Santoši, (Ur.), Proceedings of International scientific conference ETIKUM 2018 (str. 21-24). Novi Sad: University of Novi Sad, Faculty of Technical Sciences. Preuzeto s https://urn.nsk.hr/urn:nbn:hr:115:669952

Kožuh, Stjepan, et al. "Microscopic analysis of the Cu-Al-Mn-Ni shape memory alloy after heat treatment." Proceedings of International scientific conference ETIKUM 2018, Ur. Boris Agarski, Ur. Milana Ilić Mičunović, Ur. Željko Santoši, University of Novi Sad, Faculty of Technical Sciences, 2018, str. 21-24. https://urn.nsk.hr/urn:nbn:hr:115:669952

Kožuh, Stjepan, Ivana Ivanić, Ivana Krtić, Borut Kosec i Mirko Gojić. "Microscopic analysis of the Cu-Al-Mn-Ni shape memory alloy after heat treatment." U Proceedings of International scientific conference ETIKUM 2018, 21-24. Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 2018. Citirano 23.05.2024.. https://urn.nsk.hr/urn:nbn:hr:115:669952

Kožuh, S., et al. (2018) 'Microscopic analysis of the Cu-Al-Mn-Ni shape memory alloy after heat treatment', u Agarski, B. (ur.), Ilić Mičunović, M. (ur.), Santoši, Ž. (ur.), Proceedings of International scientific conference ETIKUM 2018, University of Novi Sad, Faculty of Technical Sciences, Novi Sad, str. 21-24. Preuzeto s: https://urn.nsk.hr/urn:nbn:hr:115:669952 (Datum pristupa: 23.05.2024.)

Kožuh S, Ivanić I, Krtić I, Kosec B, Gojić M. Microscopic analysis of the Cu-Al-Mn-Ni shape memory alloy after heat treatment. U: B. Agarski, ur., M. Ilić Mičunović, ur., Ž. Santoši, ur. Proceedings of International scientific conference ETIKUM 2018. Novi Sad: University of Novi Sad, Faculty of Technical Sciences; 2018. Str. 21-24. [pristupljeno 23.05.2024.] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:669952

S. Kožuh, I. Ivanić, I. Krtić, B. Kosec i M. Gojić, "Microscopic analysis of the Cu-Al-Mn-Ni shape memory alloy after heat treatment", Proceedings of International scientific conference ETIKUM 2018, B. Agarski, M. Ilić Mičunović i Ž. Santoši, Ur. Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 2018. [Online] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:669952 [Citirano: 23.05.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:669952
Podaci o radu
Naslov (engleski)Microscopic analysis of the Cu-Al-Mn-Ni shape memory alloy after heat treatment
AutorStjepan Kožuh
AutorIvana Ivanić
AutorIvana Krtić
AutorBorut Kosec
AutorMirko Gojić
UrednikBoris Agarski
UrednikMilana Ilić Mičunović
UrednikŽeljko Santoši
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
(Zavod za fizičku metalurgiju)
(Laboratorij za razvoj i primjenu materijala)
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Fizička metalurgija
Sažetak (engleski)
In this work, the microstructure of two nickel content (2.5 and 3.5 wt.%) Cu-Al-Mn-Ni shape memory alloy (SMA) after heat treatment was analyzed. The melting of technically pure was performed in specially designed copper anode which also was used as a casting mould. By this procedure, samples of cylindrical shape, ingots of 8 mm diameter and 15 mm length, were produced. The samples with various nickel content (2.5 and 3.5 wt.%) were subjected to heat treatment procedure. Selected samples were heat treated at 900 °C, held for 15 minutes on that temperature following water quenching. Optical and scanning electron microscopy revealed the presence of β'1 martensite in the microstructure. Microhardness of the samples increase drastically by increasing the nickel content from 2.5 to 3.5%, respectively.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeStručni rad - Stručni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov zbornikaProceedings of International scientific conference ETIKUM 2018
Brojčani podacistr. 21-24
ISBN978-86-6022-123-2
URN:NBNurn:nbn:hr:115:669952
Datum objave publikacije2018
SkupNaziv: ETIKUM 2018
Lokacija: Novi Sad, Srbija
Organizator: University of Novi Sad, Faculty of Technical Sciences
Datum početka: 2018-12-06
Datum završetka: 2018-12-08
Vrsta izlaganja: Predavanje
Vrsta resursaTekst
IzdavačUniversity of Novi Sad, Faculty of Technical Sciences
Mjesto izdavanjaNovi Sad
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-04-30 10:33:15