prikaz prve stranice dokumenta Influence of Cu on the microstructure development of AlSi7MgCu alloy
  Preuzmi
PDF 1.13 MB
Znanstveni rad - Izvorni znanstveni rad
Influence of Cu on the microstructure development of AlSi7MgCu alloy
U: Conference Proceedings 58th International Foundry Conference Portorož 2018. / Križman, Alojz; Mrvar, Primož; Medved, Jožef; Bührig-Polazcek, Andreas; Schumacher, Peter; Deike, Rüdiger; Suchy, Jozef; Jan-Blažič, Mirjam; Petrič, Mitja (ur.). Ljubljana, Slovenija: Slovenian Foundrymen Society, 2018. str. 1-10. urn:nbn:hr:115:263735
Zovko Brodarac, Zdenka; Stanić, Davor; Kozina, Franjo

Povezani objekti
Influence of Cu on the microstructure development of AlSi7MgCu | Rad u časopisu / Znanstveni rad - Izvorni znanstveni rad

Institucijski repozitorij: Repozitorij Metalurškog fakulteta Sveučilišta u Zagrebu

Citirajte ovaj rad

Zovko Brodarac, Z., Stanić, D. i Kozina, F. (2018). Influence of Cu on the microstructure development of AlSi7MgCu alloy. U A. Križman, (Ur.), P. Mrvar, (Ur.), J. Medved, (Ur.), A. Bührig Polazcek, (Ur.), P. Schumacher, (Ur.), R. Deike, (Ur.), J. Suchy, (Ur.), M. Jan Blažič, (Ur.), M. Petrič, (Ur.), Conference Proceedings 58th International Foundry Conference Portorož 2018 (str. 1-10). Ljubljana, Slovenija: Slovenian Foundrymen Society. Preuzeto s https://urn.nsk.hr/urn:nbn:hr:115:263735

Zovko Brodarac, Zdenka, et al. "Influence of Cu on the microstructure development of AlSi7MgCu alloy." Conference Proceedings 58th International Foundry Conference Portorož 2018, Ur. Alojz Križman, Ur. Primož Mrvar, Ur. Jožef Medved, Ur. Andreas Bührig Polazcek, Ur. Peter Schumacher, Ur. Rüdiger Deike, Ur. Jozef Suchy, Ur. Mirjam Jan Blažič, Ur. Mitja Petrič, Slovenian Foundrymen Society, 2018, str. 1-10. https://urn.nsk.hr/urn:nbn:hr:115:263735

Zovko Brodarac, Zdenka, Davor Stanić i Franjo Kozina. "Influence of Cu on the microstructure development of AlSi7MgCu alloy." U Conference Proceedings 58th International Foundry Conference Portorož 2018, 1-10. Ljubljana, Slovenija: Slovenian Foundrymen Society, 2018. Citirano 27.11.2024.. https://urn.nsk.hr/urn:nbn:hr:115:263735

Zovko Brodarac, Z., Stanić, D. i Kozina, F. (2018) 'Influence of Cu on the microstructure development of AlSi7MgCu alloy', u Križman, A. (ur.), Mrvar, P. (ur.), Medved, J. (ur.), Bührig Polazcek, A. (ur.), Schumacher, P. (ur.), Deike, R. (ur.), Suchy, J. (ur.), Jan Blažič, M. (ur.), Petrič, M. (ur.), Conference Proceedings 58th International Foundry Conference Portorož 2018, Slovenian Foundrymen Society, Ljubljana, Slovenija, str. 1-10. Preuzeto s: https://urn.nsk.hr/urn:nbn:hr:115:263735 (Datum pristupa: 27.11.2024.)

Zovko Brodarac Z, Stanić D, Kozina F. Influence of Cu on the microstructure development of AlSi7MgCu alloy. U: A. Križman, ur., P. Mrvar, ur., J. Medved, ur., A. Bührig Polazcek, ur., P. Schumacher, ur., R. Deike, ur., J. Suchy, ur., M. Jan Blažič, ur., M. Petrič, ur. Conference Proceedings 58th International Foundry Conference Portorož 2018. Ljubljana, Slovenija: Slovenian Foundrymen Society; 2018. Str. 1-10. [pristupljeno 27.11.2024.] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:263735

Z. Zovko Brodarac, D. Stanić i F. Kozina, "Influence of Cu on the microstructure development of AlSi7MgCu alloy", Conference Proceedings 58th International Foundry Conference Portorož 2018, A. Križman et al., Ur. Ljubljana, Slovenija: Slovenian Foundrymen Society, 2018. [Online] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:263735 [Citirano: 27.11.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:263735
Podaci o radu
Naslov (engleski)Influence of Cu on the microstructure development of AlSi7MgCu alloy
AutorZdenka Zovko Brodarac
AutorDavor Stanić
AutorFranjo Kozina
UrednikAlojz Križman
UrednikPrimož Mrvar
UrednikJožef Medved
UrednikAndreas Bührig-Polazcek
UrednikPeter Schumacher
UrednikRüdiger Deike
UrednikJozef Suchy
UrednikMirjam Jan-Blažič
UrednikMitja Petrič
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
(Zavod za procesnu metalurgiju)
(Laboratorij za željezo, čelik i ljevarstvo)
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Procesna metalurgija
Sažetak (engleski)
Designing and characterisation of AlSi7MgCu alloy with extra addition of Cu (up to 1.435 wt.%) represents a challenge in order to achieve advanced mechanical properties already in as-cast state. Microstructural investigation of AlSi7MgCu alloy reveals a wide range of complex reactions and possible intermetallic phases due to the interaction of alloying and trace elements. An extra addition of Cu (up to 1,435 wt.%) as a secondary alloying element initiates an additional interaction with transition elements Fe, Mn and secondary alloying element Mg. Evolution of microstructure and determination of solidification sequence enables detail overview of solidification path in both states, as-cast and heat-treated. Enrichment of solidification process with complex intermetallic phases reveals following constituents: dendrite network; iron-based needle-like Al5SiFe and / or complex Chinese script formation Al15(Fe,Mn,Cu)3Si2; main eutectic (αAl+βSi); complex eutectic clusters of Al8Mg3(Fe,Mn,Cu)Si6 and Al5(Fe,Mn,Cu)2Mg8Si6 phase and secondary eutectic phase precipitations αAl+Mg2Si and αAl+Al2(Fe,Mn,Cu). Infiltration of common transition elements such as Fe and Mn in Cu bearing phases’ resulted in high total content of transition elements (Fe+Mn+Cu). Microstructural investigation also indicates continuous interaction of Fe, Mn and Cu in formation of wide range of intermetallic phases´ through the whole solidification process. The nature (morphology and alloying elements interaction) of formed intermetallic phases comprehends to the tensile mechanical properties development due to strong connections and interactions during solidification process as a whole.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeNepoznato
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov zbornikaConference Proceedings 58th International Foundry Conference Portorož 2018
Brojčani podacistr. 1-10, 24
ISBN978-961-93723-7-1
URN:NBNurn:nbn:hr:115:263735
Datum objave publikacije2018
ProjektŠifra: KK.01.1.1.02.0020
Naziv (hrvatski): Centar za ljevarstvo - SIMET
Naziv (engleski): Center for casting - SIMET
Kratica: SIMET
Voditelj: Zdenka Zovko Brodarac
Pravna nadležnost: Hrvatska
Financijer: Europska komisija
Linija financiranja: European Regional Development Fund
ProjektŠifra: KK.01.1.1.02.0022
Naziv (hrvatski): Virtulab – Integrirani laboratorij za primarne i sekundarne sirovine
Kratica: Virtulab
Voditelj: Sibila Borojević Šoštarić; Zdenka Zovko Brodarac (MF)
Pravna nadležnost: Hrvatska
Financijer: Europska komisija
Linija financiranja: European Regional Development Fund
SkupNaziv: International Foundrymen Conference Portorož
Lokacija: Portorož, Slovenija
Organizator: Slovenian Foundrymen Society
Datum početka: 2018-09-12
Datum završetka: 2018-09-14
Vrsta izlaganja: Pozvano predavanje
Vrsta resursaTekst
IzdavačSlovenian Foundrymen Society
Mjesto izdavanjaLjubljana, Slovenija
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-05-03 13:54:36