prikaz prve stranice dokumenta Scalable Microfabrication of Folded Parylene‐Based Conductors for Stretchable Electronics
  Preuzmi
PDF 2.89 MB
Znanstveni rad - Izvorni znanstveni rad
Scalable Microfabrication of Folded Parylene‐Based Conductors for Stretchable Electronics
Advanced Electronic Materials, 7 (2021), 4; 2001236. https://doi.org/10.1002/aelm.202001236
Hartmann, Florian; Jakešová, Marie; Mao, Guoyong; Nikić, Marta; Kaltenbrunner, Martin; Đerek, Vedran; Głowacki, Eric Daniel

Institucijski repozitorij: Repozitorij Prirodoslovno-matematičkog fakulteta

Citirajte ovaj rad

Hartmann, F., Jakešová, M., Mao, G., Nikić, M., Kaltenbrunner, M., Đerek, V. i Głowacki, E. D. (2021). Scalable Microfabrication of Folded Parylene‐Based Conductors for Stretchable Electronics. Advanced Electronic Materials, 7. (4). doi: 10.1002/aelm.202001236

Hartmann, Florian, et al. "Scalable Microfabrication of Folded Parylene‐Based Conductors for Stretchable Electronics." Advanced Electronic Materials, vol. 7, br. 4, 2021. https://doi.org/10.1002/aelm.202001236

Hartmann, Florian, Marie Jakešová, Guoyong Mao, Marta Nikić, Martin Kaltenbrunner, Vedran Đerek i Eric Daniel Głowacki. "Scalable Microfabrication of Folded Parylene‐Based Conductors for Stretchable Electronics." Advanced Electronic Materials 7, br. 4 (2021). https://doi.org/10.1002/aelm.202001236

Hartmann, F., et al. (2021) 'Scalable Microfabrication of Folded Parylene‐Based Conductors for Stretchable Electronics', Advanced Electronic Materials, 7(4). doi: 10.1002/aelm.202001236

Hartmann F, Jakešová M, Mao G, Nikić M, Kaltenbrunner M, Đerek V, i sur.. Scalable Microfabrication of Folded Parylene‐Based Conductors for Stretchable Electronics. Advanced Electronic Materials [Internet]. 15.03.2021. [pristupljeno 16.05.2024.];7(4). doi: 10.1002/aelm.202001236

F. Hartmann, et al., "Scalable Microfabrication of Folded Parylene‐Based Conductors for Stretchable Electronics", Advanced Electronic Materials, vol. 7, br. 4, Ožujak 2021. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:217:878029. [Citirano: 16.05.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:217:878029
Podaci o radu
Naslov (engleski)Scalable Microfabrication of Folded Parylene‐Based Conductors for Stretchable Electronics
AutorFlorian Hartmann
AutorMarie Jakešová
AutorGuoyong Mao
AutorMarta Nikić
AutorMartin Kaltenbrunner
AutorVedran Đerek
AutorEric Daniel Głowacki
Autorova ustanovaSveučilište u Zagrebu
Prirodoslovno-matematički fakultet
(Fizički odsjek)
Znanstveno / umjetničko
područje, polje i grana		PRIRODNE ZNANOSTI
Fizika
Sažetak (engleski)
Electronics implemented on biocompatible ultrathin substrates like polyethylene terephthalate, polyimide, or parylene enabled a wide range of conformable, lightweight smart wearables and implantables. However, applications in such dynamic environments require robust devices that adjust and stretch while maintaining their functionality. Universal approaches that unite scalable, low-cost fabrication with high performance and versatile, space-efficient design are sparse. Here, stretchable architectures of parylene enabled by Origami-inspired folds at the micrometer scale are demonstrated. Parylene is directly deposited onto anisotropically etched silicon molds to greatly reduce bending stress, allowing folds with bending radii of a few micrometers. 50-nm-thick gold conductors fabricated on the folded parylene facilitate electronics with a stretchability of up to 55% tensile strain. The conductors sustain a resistance below 20 Ω during reversible stretching of more than 10 000 cycles, enabling long-term operation in practical settings. This method presents a versatile tool for the microfabrication of stretchable devices with tunable properties.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaAdvanced Electronic Materials
Brojčani podacivol. 7, br. 4, 2001236
p-ISSN2199-160X
e-ISSN2199-160X
DOIhttps://doi.org/10.1002/aelm.202001236
URN:NBNurn:nbn:hr:217:878029
Datum objave publikacije2021-03-15
ProjektŠifra: UIP-2019-04-1753
Naziv (hrvatski): Mikro i nano-strukture za 3D opto-bioelektroniku
Naziv (engleski): Micro- and nano-structures for 3D opto-bioelectronics
Kratica: 3Doptobio
Voditelj: Vedran Đerek
Pravna nadležnost: Hrvatska
Financijer: HRZZ
Linija financiranja: UIP
URL dokumentahttps://onlinelibrary.wiley.com/doi/10.1002/aelm.202001236
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Javna napomena© 2021 The Authors. Advanced Electronic Materials published by Wiley-VCH GmbH. This is an open access article under the terms of the Creative Commons Attribution License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited.
Datum i vrijeme pohrane2023-07-28 19:09:29