Bucket elevators can be classified into a continuous flow of transportation systems that serve the transportation of bulk cargo, and thereby helped by buckets which are located on the towing element that can be a rubber band or chain. Propulsion is achieved by the drive and the driven drum (or rag wheel), with the latter being connected to a drive unit consisting of an electric motor usually in combination with reduction gear. Transportation of material is usually done vertically or oblique performance as was also the case in this study. It is necessary to calculate two types of elevators, vertical and hair vehicles (in this case at an angle of 70 °). What was unusual in this type of conveyor is material transport, such as olives. In the literature it was not mentioned data and guidelines for the transportation of olives by elevator, that's why it was necessary to approach with a logical conclusion, and the approximate selection coefficients during the calculation so that more fit the transported material. For example, in the case where the traction element is chain, it is characterized by low speed and gravitational emptying buckets, which is ideal for the transportation of olives to prevent damage of the material, but because of the impurities would not suit because it is a food, and therefore it was used rubber band while maintaining low-speed transport and gravitational discharge. After calculating the forces present during transport, it was calculated and the necessary power for the electric motor, and catalog producers selected one that meets one or another performance. At the end of the work it was made calculation of axle and shaft with bearings, and in the course of the calculation are determined the dimensions of the drive and driven drum that will be used in the construction of elevator. With calculation, second task was to construct a tilted elevator that will be used in the facility for processing of olives and olive oil. Input and output of material from the elevator was determined, as well as accommodation driven (who is also the tensile) and the drive drum, all accompanied by set and workshop drawings accompanying components of designed elevator.