prikaz prve stranice dokumenta Detection of Leachable Components from Conventional and Dental Bulk-Fill Resin Composites (High and Low Viscosity) Using Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) Method
  Preuzmi
PDF 1.27 MB
Znanstveni rad - Izvorni znanstveni rad
Detection of Leachable Components from Conventional and Dental Bulk-Fill Resin Composites (High and Low Viscosity) Using Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) Method
Polymers, 15 (2023), 3; 627. https://doi.org/10.3390/polym15030627
Barišić, Matea Lapaš; Sarajlija, Hrvoje; Klarić, Eva; Knežević, Alena; Sabol, Ivan; Pandurić, Vlatko

Institucijski repozitorij: Repozitorij stomatološkog fakulteta u Zagrebu

Citirajte ovaj rad

Barišić, M. L., Sarajlija, H., Klarić, E., Knežević, A., Sabol, I. i Pandurić, V. (2023). Detection of Leachable Components from Conventional and Dental Bulk-Fill Resin Composites (High and Low Viscosity) Using Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) Method. Polymers, 15. (3). doi: 10.3390/polym15030627

Barišić, Matea Lapaš, et al. "Detection of Leachable Components from Conventional and Dental Bulk-Fill Resin Composites (High and Low Viscosity) Using Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) Method." Polymers, vol. 15, br. 3, 2023. https://doi.org/10.3390/polym15030627

Barišić, Matea Lapaš, Hrvoje Sarajlija, Eva Klarić, Alena Knežević, Ivan Sabol i Vlatko Pandurić. "Detection of Leachable Components from Conventional and Dental Bulk-Fill Resin Composites (High and Low Viscosity) Using Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) Method." Polymers 15, br. 3 (2023). https://doi.org/10.3390/polym15030627

Barišić, M. L., et al. (2023) 'Detection of Leachable Components from Conventional and Dental Bulk-Fill Resin Composites (High and Low Viscosity) Using Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) Method', Polymers, 15(3). doi: 10.3390/polym15030627

Barišić ML, Sarajlija H, Klarić E, Knežević A, Sabol I, Pandurić V. Detection of Leachable Components from Conventional and Dental Bulk-Fill Resin Composites (High and Low Viscosity) Using Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) Method. Polymers [Internet]. 25.01.2023. [pristupljeno 29.04.2024.];15(3). doi: 10.3390/polym15030627

M. L. Barišić, H. Sarajlija, E. Klarić, A. Knežević, I. Sabol i V. Pandurić, "Detection of Leachable Components from Conventional and Dental Bulk-Fill Resin Composites (High and Low Viscosity) Using Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) Method", Polymers, vol. 15, br. 3, Siječanj 2023. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:127:443043. [Citirano: 29.04.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:127:443043
Podaci o radu
Naslov (engleski)Detection of Leachable Components from Conventional and Dental Bulk-Fill Resin Composites (High and Low Viscosity) Using Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) Method
AutorMatea Lapaš Barišić
AutorHrvoje Sarajlija
AutorEva Klarić
AutorAlena Knežević
AutorIvan Sabol
AutorVlatko Pandurić
Autorova ustanovaInstitut Ruđer Bošković
Autorova ustanova(Klinički bolnički centar Zagreb)
Autorova ustanovaSveučilište u Zagrebu
Stomatološki fakultet
(Zavod za endodonciju i restaurativnu stomatologiju)
Znanstveno / umjetničko
područje, polje i grana		BIOMEDICINA I ZDRAVSTVO
Dentalna medicina
Endodoncija i restaurativna dentalna medicina
Sažetak (engleski)
The aim of this study was to investigate leachable components (monomers) in high and low viscosity dental bulk-fill resin composites and conventional resin composite materials after polymerization. Six bulk-fill and six conventional dental resin composite materials were used in this study. The samples of each material (three sets of triplicates) were cured for 20 s with irradiance of 1200 mW/cm2 with a LED curing unit and immersed in a 75% ethanol solution at 37 °C. The eluates from each triplicate set were analyzed after 24 h, 7 days or 28 days using liquid chromatography coupled with triple quadrupole tandem mass spectrometry (LC-MS/MS). Detectable amounts of 2-Hydroxyethyl methacrylate (HEMA) were found in both Gradia materials and the amount observed across different time points was statistically different (p ˂ 0.05), with the amount in solution increasing for Gradia and decreasing for Gradia Direct flo. Bisphenol A diglycidildimethacrylate (BIS GMA) was found in Filtek and Tetric materials. Triethylene glycol dimethacrylate (TEGDMA) was detected in all materials. On the other hand, there were no statistically significant differences in the amounts of TEGDMA detected across different time points in either of the tested materials. Monomers HEMA, TEGDMA, 4-dimethylaminobenzoic acid ethyl ester (DMA BEE) and BIS GMA in bulk-fill and conventional composites (high and low viscosity) can be eluted after polymerization. The good selection of composite material and proper handling, the following of the manufacturer’s instructions for polymerization and the use of finishing and polishing procedures may reduce the elution of the unpolymerized monomers> responsible for the possible allergic and genotoxic potential of dental resin composites.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaPolymers
Brojčani podacivol. 15, br. 3, 627
e-ISSN2073-4360
DOIhttps://doi.org/10.3390/polym15030627
URN:NBNurn:nbn:hr:127:443043
Datum objave publikacije2023-01-25
URL dokumentahttps://www.mdpi.com/2073-4360/15/3/627
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2023-03-17 10:13:46